BMW R47 1928 - Motorcycle specifications, reviews, technical data

Tell us what you think of this R47 1928

presentation of the R47 1928

The BMW R47 is the successor model to the R37. It is powered by a 494 cm3 flat-twin engine. Produced in 1927 and 1928, it is technically very similar to the R42. The chassis and transmission are largely identical; the main differences are in the cylinder heads and cylinders.
With a weight of 130 kilos, 3 gears and 18 hp at 4,000 rpm, this BMW could reach 110 km/h.

on release, the R47 cost 1,850 Reichsmarks, 1,050 less than the R37. Headlights, horn, speedometer and rear seat were not included.
It was lighter than the R37 and produced 2 more horsepower. The very successful technique of the R32 was in turn used for the R47, i.e. a longitudinally mounted Boxer engine with the crankshaft in the transmission axis, a universal joint, and a frame in direct connection with the steering and rear axle. Incidentally, the chassis is the same as on the R32: a tubular steel frame with no rear suspension, and a leaf-sprung fork.

production ceased after 1720 units. It was replaced by the R57.

Insurance Specifications Gallery

Image credits: D.R.
Info credits: Content under CC-BY-SA license.
Source: German Wikipedia article BMW_R47 (authors)

Published on 10/12/20
by Greg

Key facts BMW R47 (1928) : What you need to know before you buy

Prices

	Basic version
France	€

Bikers' reviews

of 0 review Read reviews

Model sold in 1927 1928

Replace R47 1927

R47 1927

Replaced by

R47 1928

Performance

Max speed : 110 km/h (68.40 mph)

Specifications BMW R47 1928

Chassis: Vehicle not capable of carrying passengers; Frame : tubular steel structure; Fuel capacity : 14 liters (3.70 US gallons); Length : 2,100 mm (82.68 in); Width : 800 mm (31.50 in); Min height : 950 mm (37.40 in); Wheelbase : 1,410 mm (55.51 in); Weight when fully loaded : 130 kg (287 lb)

Front axle: Fork + leaf spring; drum brakes Ø 150 mm (5.91 in); Front tire : 3 / 5 - 27 → Order this type of tire

Transmission: 3 stage gearbox; Secondary cardan shaft

Rear axle: rigide; unspecified brakes; Rear tire : 3 / 5 - 27 → Order this type of tire

Motor: two-cylinder flat , 4 strokes; Carburettor Ø 22 mm; Cooling system : by air; 2 valves per cylinder; 494 cc; 18 ch (17.80 hp) to 4,000 rpm; Power-to-weight ratio : approximately 6.6 kg/ch; Compression : 5.8 : 1

Practical information

Take care of your motorcycle! Find all the parts and maintenance products you need to keep your bike in top condition.

motor fluid exhaust Chain kit electricity filtration braking Tires

Motorcyle equipment adapted for all members of the family and security elements.

Models

1928

1927

Used

We don't have used motorcycles for this model, but refine your search and find the model that best suits your needs.

Competition

Find others Sport of 1928

Compare the R47 to its competitors

filter and compareother models

Bikers' reviews Leave a review

FAQ Your frequently asked questions about the R47 1928

What is the power of the R47 1928?: The R47 1928 develops a power of 18 ch (17.80 hp)
What is the maximum speed of the R47 1928?: The R47 1928 is capable of reaching a top speed of 110 km/h (68.40 mph) on the track.
What is the weight of the R47 1928?: The R47 1928 has a a weight when fully loaded of 130 kg (287 lb).
What is the price of the R47 1928?: , in France
Is the R47 1928 approved for transporting a passenger?: No, this vehicle is only suitable for 1 people; it is a single-seater.

Motorcycle specifications BMWR47 1928

presentation of the R47 1928