Motorcycle specifications ApriliaSMV 750 DORSODURO Factory 2010 Look after your outfit
presentation of the SMV 750 DORSODURO Factory 2010
lighter, more efficient, more fun... The first two arguments are those of all Aprilia Factory versions(RSV-R 1000, Tuono R, RSV4); a notable optimization to raise the machine's level of efficiency a notch. The third is for the machine's wild side.
In its turn, the spirited Dorsoduro supermotard comes in a Factory version. It's impossible not to suspect that this version is hot-blooded: the red frame, barely concealed beneath the black dress, betrays an ebullient temperament. To earn the Factory label, an Aprilia must meet certain criteria. This starts with the use of carbon fiber parts. On the SVM 750, it's the front mudguard, the wide side scoops and most of the fuel tank cladding that benefit from the nobility of this material.
secondly, the suspension. Factory models are normally fitted with Öhlins elements. But this is not the case on the Dorsoduro. A minor disappointment, as the prestigious name would lead us to believe. That's not to say that forks and shock absorbers remain standard. They are fully adjustable for preload, compression and rebound. The base version doesn't get as much attention to fine-tuning its handling.
with this toy, there's now plenty of room for serious nerdiness. The 92hp twin is equipped with a triple-mapping control unit and Ride by Wire injection. New petal brake discs are bitten by Brembo 4-piston radial calipers. Chassis-wise, Aprilia's technology suffers no criticism whatsoever, with the exception of some damping issues, which this Factory version should rectify. Expect to pay around 800 euros more for this Dorsoduro Factory, and a further 600 euros if you want ABS (due in September).
M.B - Factory photos
by Greg
Share
Key facts Aprilia SMV 750 DORSODURO Factory (2010) : What you need to know before you buy
Highlights
- Sporty supermotard
- Powerful Twin
- Improved suspension
- Carbon parts
Weak points
- No Öhlins suspension
- Autonomies
- Autonomies
Prices
| Basic version | with ABS | |
|---|---|---|
 France |
9,849€
|
10,449€
|
Performance
- Max speed : over 200 km/h (124.30 mph)
- 0-100 km/h acceleration : 3.90 s
- Average fuel consumption : 6.50 liters/100km (0.36 mpg)
-
Estimated range
: 185 km (115 miles)
Calculated range until tank is empty, not verified.
Specifications Aprilia SMV 750 DORSODURO Factory 2010
- Chassis
- Frame : Tubular steel mesh connected to 2 aluminum plates
- Fuel capacity : 12 liters (3.17 US gallons)
- Seat height : 870 mm (34.25 in)
- Length : 2,216 mm (87.24 in)
- Width : 905 mm (35.63 in)
- Min height : 1,185 mm (46.65 in)
- Wheelbase : 1,505 mm (59.25 in)
- Dry weight : 184 kg (406 lb)
- Weight when fully loaded : 210 kg (463 lb)
- Front axle
- Reverse telehydraulic fork Ø 43 mm, Wheel travel : 160 mm (6.30 in)
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Pressure : 2.3 bar
- Transmission
- 6 stage gearbox
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 160 mm (6.30 in)
- Braking 1 disc Ø 240 mm (9.45 in), single-piston caliper
- Rear tire : 180 / 55 - 17 → Order this type of tire
- Pressure : 2.5 bar
- Motor
- two-cylinder 90° L-shape , 4 strokes
- Injection
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 749.90 cc
- 92 ch (90.70 hp) to 8,750 rpm
- 8.40 mkg to 4,500 rpm
- Power-to-weight ratio : 2.03 kg/ch
- Weight / torque ratio : 21.9 kg/mkg
- Compression : 11 : 1
- Practical information
Used
Competitors
Compare the SMV 750 DORSODURO Factory to its competitors
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the SMV 750 DORSODURO Factory 2010
- What is the power of the SMV 750 DORSODURO Factory 2010?
-
The SMV 750 DORSODURO Factory 2010 develops a power of 92 ch (90.70 hp)
- What is the torque of the SMV 750 DORSODURO Factory 2010?
-
The maximum torque of the SMV 750 DORSODURO Factory 2010 is 8.40 mkg to 4,500 rpm.
- What is the maximum speed of the SMV 750 DORSODURO Factory 2010?
-
The SMV 750 DORSODURO Factory 2010 is capable of reaching a top speed of over 200 km/h (124.30 mph) on the track.
- What is the weight of the SMV 750 DORSODURO Factory 2010?
-
The SMV 750 DORSODURO Factory 2010 has a a dry weight of 184 kg (406 lb), a weight when fully loaded of 210 kg (463 lb).
- What is the fuel consumption of the SMV 750 DORSODURO Factory 2010?
-
Average fuel consumption is estimated at 6.50 l/100km (0.36 mpg) according to the WMTC cycle.
- QWhat is the seat height of the SMV 750 DORSODURO Factory 2010?
-
To ensure good accessibility, the SMV 750 DORSODURO Factory 2010 offers a minimum seat height of 870 mm (34.25 in).
- What is the price of the SMV 750 DORSODURO Factory 2010?
-
The price of the SMV 750 DORSODURO Factory 2010 is 9,849€ in France. It is displayed at 10,449€ in France with ABS.
News
-
New motorcycle products for 2026
-
Bridgestone announces the RS12, its new road-race weapon.
-
Yamaha Race Like A Girl: Natalia Rivera in episode 5.
-
Bridgestone presents the Battlax V03, its new slick tire.
-
With Sartoria Meccanica, MV-Agusta aims to go beyond premium.
-
Upgrading the entire Bonneville family for 2026.
-
Metzeler unveils three new tires at EICMA.
-
World Superbike celebrates 70 years of Yamaha.
-
Exceptional: some thirty new Triumphs in 2026.
-
40.000 bikers for the Royal-Enfield "One Ride" 2025.
Bikers' reviews Leave a review - 1 review